The mobile water park is at its peak during business hours, and needs to carry thousands of customers every day, so the water quality needs special attention. With a certain scale of water park, the water change is as low as several hundred tons each time. The water change is too frequent, which not only wastes time but also increases costs. So how to deal with water quality problems has become a headache for many operators. Let me share some tips and methods here ~
Generally, because the amount of water in a mobile swimming pool is large, it can range from a few hundred tons to a few thousand tons. If the water is changed every day, it will not only be a huge amount of complicated work, but also make the operating costs high. Therefore, almost all swimming pools are rarely changed. But how does this guarantee the water quality in the swimming pool?
First, the use of sand jar
The sand jar plays a very important role in the water park. Using the sand jar can reduce our waste of water, because with the sand jar we can not change the water in a summer. The trouble of changing the water every time, so as to ensure the cleanliness of the pool, also saves a lot of costs for customers, and also makes it easier for customers to operate. Of course, there are also many customers who use the sand jar improperly, or do not know how to use it, then let Xiaobian lead you to see the common functions of the sand jar!
1. Normal filtration: Normal filtration is our commonly used gear. When this gear is turned on, the water will be circulated and filtered in the sand tank, the dirty things will be filtered out, and then the purified water will be put into the pool.
2. Drainage without filtration: This gear is used by us every day when sucking dirt. In conjunction with manual dirt suction, when this gear is turned on during dirt suction, the dirt will be discharged directly through the sewage outlet.
3. No filtering cycle: half of this medicine used after the drug is put in circulation for half an hour.
Of course, you must pay attention to these matters during use:
1.The power of the sand cylinder must be switched off
2. If the water does not precipitate, the reason is: a. The water quality is acidic, b. There is sun, c. There are too many impurities, and the precipitation is slow.
3. The medicine must first be fully dissolved in the small bucket and evenly spread on the water surface, and then open the sand jar to make the medicine even in the water.
The daily maintenance of ordinary swimming pools can greatly reduce water pollution, so daily routines should be done:
1. Maintain the sanitary environment around the swimming pool, and often clean and salvage the debris on the water surface in the pool to reduce the floating and accumulation of debris.
2. It is forbidden for tourists with skin diseases to enter the water. It is also necessary to allow tourists to swim in bathing suits and swimming trunks to avoid pools of stained and contaminated bacteria.
3, tourists before entering the pool should be disinfected in the disinfection tank before entering the field.
4. Tourists are not allowed to urinate in the pool. Please come to the toilet in the venue.
